2008 International Exhibition connector and the cable industry – electronics industry

Start time: 2008-11-26 End Time: 2008-11-28 Location: Shenzhen Convention and Exhibition Centre Hong Kong International Exhibition Co., Ltd. expanded

Contact: Phone Wang Jing contact: 021-64363606 Sponsored by: Guangdong Institute of Electronics
Sponsor: Exhibition Service Co., Ltd. Shanghai expansion
(1) the authority of the International Convention and Industry Association exhibitions and strong institutions combination, abundant resources, vast
Business Network />

(2) connector on the seventh international exhibition of industrial connectors and cable experience, strong building world-class events

develop successfully held the seventh international exhibition international plug connectors and cable exposure, drew a large participation of many famous company, purchasing, receiving good results. 2008 held in Shenzhen AEE Association is the decision-making will be bigger and stronger trade fair starting point, Guangdong Institute of Electronics, Hong Kong International Exhibition Co., organizers extended strong combination, integration of resources, to build the most influential international connectors connectors and cable industry show.

(3) the authority of the Technical Forum will build a high-level exchanges and cooperation platform for the exhibition will be accompanied by a large

Symposium and the authority will promote the technology, as well as inside and outside academia and the business community that summarize and discuss the connectors and cable connectors in the field of theories, new technologies , new results The new product, provide the industry with high high-level exchanges and cooperation platform.

(4) industrial base, a huge market demand, the location advantages, opportunities not to be missed
Shenzhen gathered in the large country’s mobile communications, computing, consumer electronics public, appliance manufacturers, with Lenovo, Samsung, BYD, AUX, Desai Toshiba, TCL, and a number of manufacturers of fine marks, the National Council of major production base in the important area electronics exports, consumption areas; Shenzhen is also the national mobile phone, digital camera, camcorder, laptop areas with penetration highest, this will highlight the application market is an extremely broad topic. Adjacent to Hong Kong and Macao, Southeast Asia radiation, the location of the communication in the world, the electronics industry in China is an important window of foreign trade.

(5) results-oriented audience well organized, multi-channel surrounding the promotion
Exhibition invite domestic and foreign mobile communications, laptops, music players, digital cameras , construction, lighting and other industries will be the primary user to visit the market, and through the media, trade journals, websites and other media for more than 200 advertising coverage in all directions.

Why is held in Shenzhen visit
EEA Eighth round of the South China Shenzhen Convention and Exhibition Center, Shenzhen as
1, Bank of China’s foreign trade, is the better trade and technology exchange with the window, connected by Hong Kong a high degree of commercial synergies and radiation; Shenzhen is China’s economy the strongest, the fastest growing cities, the total import and export volume and export for 12 consecutive years among the first cities in China such as China per capita gross domestic product of the city.

2, a major manufacturing base for electronic information: electronic, optical, automotive electronics, communications, computers other fields are a world leader in high technology industries are booming;

Development of sensors in automotive applications – Sensors – Power Industry

Concept of hierarchical control with the continuous development of the intelligent charging and increasing demand for sensors and SoC product because of its cost, the advantage of little small, the solution is to fit the program development. Infineon Technologies (China) Limited automotive electronics business, said Li Shiming, Senior Marketing Engineer “a new generation of Infineon SP37 Tire Pressure Monitoring System (TPMS) single-chip solution to comply with this trend, the controller unit detection, an RF transmitter, low frequency power modules and power receiver integrated in a chip, the requirement of auto-on-chip “.

TPMS is a comparison of speculation in the Chinese market a concept of fire, but so far only the United States is the law enforcement world countries TPMS. Since September 2007, all U.S. after Sell The maximum design weight not exceeding 4536 kg in total of four cars and commercial vehicles are required to install TPMS. Although the voice of TPMS in China has been a long time, but the standard is postponed again and again, the current application is limited only to certain high-end models, but these did not prevent the semiconductor manufacturers drivers-a huge investment in this area.

The industry agrees that the following TPMS transmitter module is highly integrated, single management passivity wireless. TPMS with IC market on the high integration and high reliability requirements, it is currently testing the physical requirements of MEMS sensor with triple the microcontroller, RF module of the next generation of TPMS sensor. Such as TPMS solution Freescale MPXY8300, is the capacitive pressure sensor, temperature sensor components, MCU, RF, acceleration sensors and an alarm function of the interface circuit, all integrated into one chip, and uses Freescale’s ultra-small package (SSOP). Ultra-small size and improved protective function of the media makes the program particularly suited to the tire valve or install.

concept of hierarchical control with the continuous development of the intelligent charging and increasing demand for sensors and SoC product because of its cost, the advantage of little small, is the solution to accommodate this development program. Infineon Technologies (China) Co., Ltd. Main unit of car electronics marketing company engineer, said Li Shiming, “Infineon SP37 Tire Pressure Monitoring System the new generation (TPMS) single-chip solution to comply with this trend, the controller , the detection unit, RF transmitter, receivers and low-frequency power supply built into a chip inside, reached car-on-chip requirements. “

The car design for accuracy management is an important factor, Infineon success of giant magnetoresistance (GMR) integration in standard CMOS semiconductor manufacturing process. “In the electric power steering system, the Infineon technology-based integrated GMR (IGMR) of the sensor chip set technology-based and smart linear Hall effect sensor can be perfect to achieve the perception of the angle steering and torque. ” Shiming Li said. Infineon’s sensors can accurately measure the 0 to 360 abnormal steering angle, has two full-bridge GMR, a temperature sensor, two ADCs, a number of regulators, filters, and execute the process can follow permanently the internal mechanism of these components. TLE5010 angle sensor chip with two digital components? Sine and cosine functions. Sensor through the SPI interface, 8-bit microcontroller to use these components to calculate the actual angle of the signal.

transmission type sensor is also known as intermittent sensor, consisting of a front mounted infrared emitter and detector, a small gap between the two, when a similar cycle of the transmitter and detector object code by Once through the gap between the device will block the beam, the sensors can detect if an object exists. Vishay Surface Mount Transmission (intermittent style) TCPT1300X01 photoelectric sensor and TCUT1300X01, reached the level of the junction temperature of 145, -40 ~ 125 range operating temperature and moisture sensitivity level 1 (MSL1).

The radar technology is the design of innovative driver assistance, to avoid the affects of traffic accidents. Automotive radar systems can send radio frequency electromagnetic waves, these electromagnetic waves encountered the vehicle in front or other objects can be reflected, the radar chip is responsible for sending and receiving of radio signals, and a therapy. Evaluation context to determine the distance between vehicles and other vehicles and other vehicles speed. Therefore, when the forecast to take place when the vehicles collided, head restraints and seat belts will be ready in advance, to help reduce the impact of the accident. At the same time, the same signal is also sent to the brake system or airbag system. Infineon RXN7740 radar is suitable for frequency range 76-77GHz highly integrated front-end chips, including the oscillator function block, suitable for power amplifier and four mixers for multiple antennas. Separate these functions with the current radar system that the radar system will allow manufacturers to reduce the size of a quarter of the radio frequency module for more than 20% reduction in system cost.

The automotive industry in Iowa

What the auto industry?

no repeat scroll 0% 0% The automotive industry is one of the most profitable sectors of the world, since people have become very dependent on driving. Offers the automotive industry with the design, development, manufacture, marketing and sale of motor vehicles.

Most companies Iowa that produce parts cars are classified as Tier 2 or Tier 3 manufacturers. They sell their products to other companies who use them to produce equipment that they, or another company to provide the automakers. Many jobs in Iowa are an offshoot of the automotive industry in Iowa these include:. Automotive dealers and anyone supporting sales, accounting, legal and repair technicians, dealer management are some of the people who benefit from this industry

0% 0% Like all other industries in the automotive sector in Iowa has taken a terrible blow because of the recession. According to the Economic Policy Institute in a report published in 2008 the collapse of General Motors alone could cut 9,400 jobs, or 0.6% of employment in Iowa. He further stated that if the “Big Three” (General Motors, Ford and Chrysler) were to collapse Iowa could lose 33.900 jobs or 2.3 percent of state employment in the worst cases.

no repeat scroll 0% 0% Lemon Law

Because of these challenges, the service quality of many of these car companies were down, with customers having to feel the effects. The United States has implemented several laws to help keep the balance in the automotive industry. One in particular, is the lemon law in Iowa. This law provides protection to customers against buying cars down. It is a way to ensure that manufactures, dealers etc. respond to consumer complaints in an ideal time. It does not limit the rights of consumers. To qualify for the law, problem or defect should take the vehicle to be unreliable, unfit or unsafe for ordinary use. Certain conditions must be in place for the law to be effective. These include, multiple visits to the auto shop with the same problem, or just once if the problem is likely to cause death, or if the vehicle out of service for 20 days or more and the problem still exists. The law also requires the production to inform consumers of their rights and to provide other necessary information such as address and phone number so that the consumer may file a complaint if necessary. Defense manufacturing is also included in the Lemon Law Iowa, where an application can be made that failure is not the result of actions taken by the dealer. The consumer also has the right to take the builder to court if the dispute is not resolved.

With the recession, slowly but surely coming to an end only time will tell the fate of the auto industry in Iowa.